|
Appearance (25°C) |
Yellow viscous liquid |
|
pH (10%) |
3.0 – 6.0 |
|
Ionicity |
Cationic |
|
Active content |
100% |
|
Product type |
Anti-ozone softener |
|
Dilution |
Must be pre-diluted to 5–10%; not for direct use |
|
Application process |
Exhaustion and padding |
|
Dosage - exhaustion |
2.0 – 10.0% o.w.f. (based on a 10% dilution) |
|
Dosage - padding |
20.0 – 100.0 g/L (based on a 10% dilution) |
|
Packaging |
120 kg per drum |
|
Shelf life |
12 months in original sealed packaging at ambient temperature |
|
Storage conditions |
Cool, ventilated, dry, sealed; avoid extreme heat or cold |
Product Overview
Honesoft® V9 is a Solvent-Free Anti-Ozone Softener for indigo denim, supplied as a yellow viscous liquid with 100% active content. It is a high-adsorptivity cationic softener that disperses in water at ambient temperature. Applied in the finishing stage, it protects indigo denim against ozone fading while imparting a soft, fluffy hand, and keeps the fabric hydrophilic so that moisture absorption is retained. The product also provides a degree of antistatic performance and is AEEA-free. V9 cannot be used directly: it must be pre-diluted to a 5–10% solution before dosing, and is suitable for both exhaustion and padding processes.
Product Features
- High-adsorptivity cationic softener, 100% active content, water-dispersible at ambient temperature.
- Provides excellent anti-ozone protection for indigo denim and suppresses ozone fading.
- Imparts a soft, fluffy hand to fabrics.
- Outstanding hydrophilicity - the moisture absorption property of the fabric is maintained.
- Provides a degree of antistatic performance.
- AEEA-free.
Key Advantages
1. Anti-ozone and softness in a single step: V9 gives the fabric its soft hand while protecting indigo denim against ozone fading, so no separate anti-ozone process is required.
2. Soft and fluffy, with excellent hydrophilicity: the fabric keeps its moisture absorption and breathability, which raises wearing comfort.
3. 100% active, solvent-free and environmentally sound: supplied at 100% active content with no solvent in the formulation, and can be shipped as general cargo.
4. Water-dispersible at ambient temperature: no hot dissolution step is needed, which keeps handling simple and suits plants without heating equipment. The TDS recommends dilution water at 20–30°C (heated to 30–40°C if the water is below 20°C).
5. AEEA-free and bluesign compliant: V9 contains no AEEA and meets the bluesign criteria.
Application Scenarios
- Anti-ozone finishing of light-shade indigo denim: protection against ozone fading during retail display and distribution.
Process Flow (Recommended Application)
【1. Dilution (mandatory - not for direct use) 】
Honesoft® V9 is a 100% active-content softener and cannot be used directly. Pre-dilute it into a 5–10% solution before dosing. A concentration above this range causes the viscosity of the diluted solution to rise sharply and impairs its re-dilution behaviour.
【Recommended dilution procedure】
(1) Add the required amount of 20–30°C water to the dosing tank. If the water is below 20°C, heat it to 30–40°C before use.
(2) Add V9 while stirring, and stir at medium speed until it is fully dispersed and dissolved and the diluted solution shows no visible particles.
(3) Filter and discharge; the diluted solution is then ready for use.
【2. Exhaustion process】
Dosage: 2.0 – 10.0% o.w.f. (based on a 10% dilution).
【3. Padding process】
Dosage: 20.0 – 100.0 g/L (based on a 10% dilution).
【4. Dosage adjustment】
The dosage may be increased or decreased for special substrates or special finishing requirements. Confirm the final recipe by lab trial before bulk production.
Packaging, Storage & Safety
Packaging: 120 kg per drum.
Shelf life: 12 months in the original sealed packaging at ambient temperature.
Storage: keep the packaging properly sealed in a cool, ventilated and dry environment. Avoid prolonged direct exposure to air and storage in extremely cold or hot conditions; prolonged exposure to high temperatures may cause discoloration and deterioration.
Safety: before using any of our products, consult the latest Material Safety Data Sheet (MSDS/TDS). Contact us to obtain the MSDS and other safety-related information, and take the necessary safety precautions before handling.
Precautions
- Honesoft® V9 is derived from natural oil-based chemicals. During storage, layer separation, thickening as the temperature falls and thinning as it rises are normal physical changes arising from its structure; they do not affect product performance. Stir the full drum uniformly before dilution.
- This is a cationic product and must not be used in the same bath with anionic auxiliaries.
If the dilution water is below 20°C, heat it to 30–40°C first (see 1. Dilution (mandatory - not for direct use) ).

